AKUSENSE
Sensor
Position：AKUSENSE > Products > Fiber Amplitier
PB1
Fiber Amplifiers
. Operating voltage:8～30V DC
. Selectable L.on/D.on
대한민국 자동화산업의 리더 HM TECH을 소개합니다.
. Operating voltage:8～30V DC
. Selectable L.on/D.on
| Model | PB1 | |||
| Light source | Modulated red light 680nm | |||
| Operating voltage | 8~30V DC | |||
| Saturation voltage | 25mA＜1.2V，100mA＜2V | |||
| Load current | ＜50mA | |||
| Output current | ＜200mA | |||
| Leakage current | ＜100uA | |||
| Output type | NPN/PNP open-collector | |||
| Switch type | Selectable L.on/D.on | |||
| Display screen | 7 segment 8 digit display (red: 4 digit, green: 4 digit) | |||
| Response time | 50μs/ 250μs/ 500μs/ 1ms/ 4ms | |||
| Time delay function | ＜50ms | |||
| Operating temperature | -10°C～＋60°C | |||
| Operating humidity | 35~85%RH | |||
| Ambient brightness | Sunlight≤10000Lux | |||
| Protective circuit | Short circuit protection, Reverse polarity protection, Over voltage protection | |||
| Impact resistance | 10G(1500m/s2), XYZ three directions | |||
| Anti-vibration | 10~55Hz Double amplitude 1.5mm, XYZ three directions, 2 hours each | |||
| Certificate | CE | |||
| Connection | 2m 4 core cable | |||
| Weight | 65g | |||
HM TECH에 대한 궁금증이나 질문이 있으시면 질문게시판을 이용해주세요.